Description The Mechan CS2 safety switches haver the same technical features as the CS1, they are a fully digital electronic, totally encapsulated, fail-safe switches designed to work in harsh conditions. This electronic safety switch is designed for use with the Mechan CODEX safety control units and provides not only long term reliability, but also a consistant switching distance(10mm +/- 0.5). This makes the CS safety switch quick to install, tolerant to misalignment, and capable of providing years of trouble free service.
Mechan's Dynamic Signalling techniques continuously monitor each safety switch. Damage to the safety switch cable or the switch itself will result in the safety control unit going to a safe state. Indication at the control unit will speed up any fault diagnosis.
The robust design, ABS housing with completely encapsulated electronics and cable entry, provides a safety switch that realy can withstand harsh environments. High pressure hose cleaning, wash-down procedures, dust or machine oil and swarf have little or no effect on the CS safety switches. The 4mm pre-drilled fixing holes through the body of the switch make for easy fitting and exceptional physical strength.
The CS2 safety switches are supplied pre-wired with 5 / 10 or 15 metre cables and offset fixing holes.
Longer cables can be ordered if required. Maximum cable length 100m. 
Dimensions 
Dimension in MM
Technical Specification
| Specifications | | Operation | Digital Electronic | | Max Switches per System | 30 | | Switching Distance | 8 - 10mm | | Construction | ABS, Resin Filled | | IP Rating | IP67 | | Cable Lengths | 5, 10 or 15 metres ( Max 100m) |
|
